Frequently Asked Questions
What
is the Fireplace Heatsaver?
The
Fireplace Heatsaver is a transparent acrylic shield
that fits over the fire or fireplace opening when the fire is not
in use, preventing heat loss up the chimney. For further details click
to see a >
brochure <
How
does the Fireplace Heatsaver work?
The
Fireplace Heatsaver stops t he chimney taking heat
out of your room and cuts down draughts. Click to run an animation
showing the "stack effect".
How
much money will the Fireplace Heatsaver save me?
The
Fireplace Heatsaver was tested by independent test
house BSRIA, using calculations based on SAP 2005. BSRIA measured
savings as much as £144 per year. Click for >
test results <
Will
the Fireplace Heatsaver prevent chimney downdraughts?
The
Fireplace Heatsaver stops downdraughts. You may
need to fix it in place with tape etc. to stop it rattling or moving
away from the opening.
Will
the Fireplace Heatsaver work for my fire?
The
Fireplace Heatsaver will work for most fires but
not those with back boiler units, flue-less gas fires or stoves. If
you need to check suitability please contact us or email
here.
Will
The Fireplace Heatsaver help the environment?
Yes,
the Fireplace Heatsaver will reduce your carbon footprint
by reducing the need to use your fire, enabling you to turn down your
heating system, reducing fuel usage.
What
is the Stack Effect?
The
stack effect is a continuous cycle of air movement in houses with
a chimney or a flue. Warm air escapes up the chimney and is replaced
by cold air drawn in through gaps under doors, around windows, through
floorboards and the building fabric.
In simple terms, a chimney has an effect
like a window left constantly open.
Can
I use the Fireplace Heatsaver when the fire is operating?
NO.
The Fireplace Heatsaver must not be used
when the fire is operating. It is not a fireguard. Only install
when the fire has cooled to normal room temperature. Further details
can be found >
here <.
Can
I fit the Fireplace Heatsaver myself?
Yes,
it is easy to fit with no special skills or tools needed. Click
for >
installation details <..
What
if I want to use my fire?
Simply
remove the Fireplace Heatsaver from in front of
your fire and store until needed.
Does
the Fireplace Heatsaver provide ventilation to the chimney?
Yes, the Fireplace Heatsaver has two small gaps
at the bottom corners to allow a trickle of air to vent the chimney
to prevent damp.
How
long can I leave the Fireplace Heatsaver in place?
You
can leave the Fireplace Heatsaver in place for
as long as you want, reducing draughts, saving energy and saving
money.
How
do I know what size of Fireplace Heatsaver I need?
Measure
the height and width of the minimum size rectangular flat area
immediately around all of the fire and the grate and hood etc.
projection. Check these dimensions to the standard heatsaver internal
dimension, height 660mm, width 630mm and projection 117mm. If
our standard size Heatsaver does not enclose the fire, a larger
Heatsaver can be made. Alternatively, a flat fitting Slimline
Heatsaver may be suitable if there is a suitable flat area to
cover. For more details click
here.
How
do I buy a Fireplace Heatsaver?
A
standard Fireplace Heatsaver or a Slimline shaped
Fireplace Heatsaver can be ordered on-line here.
For a Custom Fireplace Heatsaver please contact
sales on 01924 368899.
